Китай RCH-200E1JA 200 RT Liquid-Suspended Variable-Frequency Centrifugal Chiller производител и фабрика | Hfsinopower.com
друго

Industrial auxiliary equipment

У дома

Industrial auxiliary equipment

RCH-200E1JA 200 RT Liquid-Suspended Variable-Frequency Centrifugal Chiller

RCH-200E1JA 200 RT Liquid-Suspended Variable-Frequency Centrifugal Chiller
RCH-200E1JA 200 RT Liquid-Suspended Variable-Frequency Centrifugal Chiller
RCH-200E1JA 200 RT Liquid-Suspended Variable-Frequency Centrifugal Chiller
RCH-200E1JA 200 RT Liquid-Suspended Variable-Frequency Centrifugal Chiller

RCH-200E1JA 200 RT Liquid-Suspended Variable-Frequency Centrifugal Chiller

Product introduction

The RCH-200E1JA chiller has a cooling capacity of 705 kW (200 RT) and a standard-condition chilled-water outlet temperature of 7°C. The unit adopts two liquid-suspended variable-frequency centrifugal compressors, a falling-film / flooded evaporator, and a shell-and-tube condenser. The COP is 6.32 and the IPLV is 8.86. The power supply is 380 V, 3-phase, 50 Hz; the starting current is 2 A, the rated current is 171 A, and the maximum current is 197 A. The water-side design pressure is 1.0 MPa. Both the evaporator and condenser water connections are DN150. The overall dimensions are 4185 × 1810 × 1980 mm, and the operating weight is 4050 kg. The parameters are based on the standard conditions of GB/T 18430.1-2024, and the energy-efficiency evaluation is based on GB 19577-2024.

Нови продукти
  • информация за продукта

Product Description

RCH-200E1JA 200 RT Liquid-Suspended Variable-Frequency Centrifugal Chiller

The RCH-200E1JA is a 200 RT (705 kW) liquid-suspended variable-frequency centrifugal chiller. It uses two liquid-suspended variable-frequency centrifugal compressors and achieves a COP of 6.32 and an IPLV of 8.86 under standard conditions. It is suitable for centralized cooling applications that require part-load efficiency and operating modulation.

Key Advantages:

  1. Zero Friction, Oil-Free & High Efficiency

  2. 15% Minimum Load, High Efficiency Across All Conditions

  3. 100% Precision, Software Synergy

  4.  
  5. 97% Efficiency, Integrated Cooling
  6.  
  7.  

Production Parameters

Parameter Unit Specification
Performance Parameters
Cooling Capacity kW 705
Cooling Capacity RT 200
Chilled Water Outlet Temperature °C 7
Input Power kW 111.5
Power Supply Capacity kW 134
COP kW/kW 6.32
IPLV – 8.86
Electrical Parameters
Power Supply – 380 V, 3-phase, 50 Hz
Starting Current A 2
Rated Current A 171
Maximum Current A 197
Compressor
Type – Liquid-suspended, variable-frequency centrifugal compressor
Quantity – 2
Evaporator
Type – Falling-film / flooded type
Water Flow Rate m³/h 121
Pressure kPa 55
Water Connection Size DN DN 150
Condenser
Type – Shell-and-tube type
Water Flow Rate m³/h 152
Pressure kPa 62
Water Connection Size DN DN 150

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Product Features

  1. 1.200 RT-Class Cooling Capacity, 705 kW Under Standard Conditions
    Standard-condition chilled-water outlet temperature 7°C, meeting 200 RT-class centralized cooling selection requirements.

  2. 2.Dual Liquid-Suspended Variable-Frequency Centrifugal Compressors
    Equipped with 2 liquid-suspended, variable-frequency centrifugal compressors, supporting variable-frequency operation and modulation, with a starting current of 2 A.

  3. 3.High-Efficiency Parameters
    Standard-condition COP 6.32 kW/kW and IPLV 8.86, with focus on full-load and part-load efficiency.

  4. 4.Falling-Film / Flooded Evaporator + Shell-and-Tube Condenser
    Evaporator water flow rate 121 m³/h, pressure drop 55 kPa; condenser water flow rate 152 m³/h, pressure drop 62 kPa; both water connections are DN150.

  5. 5.Compact Dimensions for Project Layout
    Overall dimensions 4185 × 1810 × 1980 mm; shipping weight 3640 kg; operating weight 4050 kg.

  6. 6.Standards Compliance and Pressure Customization Note
    Standard-condition parameters are based on GB/T 18430.1-2024; energy-efficiency evaluation is based on GB 19577-2024. Water-side design pressure is 1.0 MPa; requirements exceeding this pressure can be specified at the time of ordering.

Application Scenario 

The RCH-200E1JA is suitable for centralized air-conditioning or process cooling applications requiring 200 RT-class cooling capacity, such as commercial complexes, office buildings, hotels, hospitals, and industrial plants. Actual selection must be checked against project cooling load, chilled-water/cooling-water temperatures, flow rates, pressure drops, installation space, transportation conditions, and local energy-efficiency requirements.

FAQ

Q1: What is the cooling capacity of the RCH-200E1JA?
A: The standard-condition cooling capacity is 705 kW, corresponding to 200 RT.

Q2: What are the standard conditions?
A: According to GB/T 18430.1-2024, the chilled-water outlet temperature is 7°C, the cooling-water inlet temperature is 30°C, and the chilled-water and cooling-water flow rates are calculated using the coefficients stated in this document.

Q3: What is the water-side design pressure? What if it is exceeded?
A: The water-side design pressure of the evaporator and condenser is 1.0 MPa. If the project operating pressure exceeds 1.0 MPa, this must be specified when placing the order.

Q4: Can the parameters be used directly for final selection?
A: The parameters on this page are standard-condition parameters. Final selection must be confirmed based on project conditions, flow rates, pressure drops, installation, and transportation conditions. Product parameters may be revised due to updates.

 

--------------占位---------------

остави съобщение
Ако се интересувате от нашите продукти и искате да научите повече подробности, моля, оставете съобщение тук, ние ще ви отговорим възможно най-скоро.

Свързани продукти

RCH-100E1JA Water-Cooled Refrigerant-lubricated bearing Centrifugal Chiller
RCH-100E1JA Water-Cooled Refrigerant-lubricated bearing Centrifugal Chiller

Product   Introduction The RCH-100E1JA is a high-efficiency, medium-capacity water-cooled chiller designed for demanding commercial and industrial applications. Delivering a robust cooling capacity of 355 kW (100 RT) at a standard chilled water outlet temperature of 7°C, it is an ideal central cooling solution for facilities requiring reliable, continuous operation

ПРОЧЕТЕТЕ ОЩЕ
RCH-200E1JA 200 RT Liquid-Suspended Variable-Frequency Centrifugal Chiller
RCH-200E1JA 200 RT Liquid-Suspended Variable-Frequency Centrifugal Chiller

Product introduction The RCH-200E1JA chiller has a cooling capacity of 705 kW (200 RT) and a standard-condition chilled-water outlet temperature of 7°C. The unit adopts two liquid-suspended variable-frequency centrifugal compressors, a falling-film / flooded evaporator, and a shell-and-tube condenser. The COP is 6.32 and the IPLV is 8.86. The power supply is 380 V, 3-phase, 50 Hz; the starting current is 2 A, the rated current is 171 A, and the maximum current is 197 A. The water-side design pressure is 1.0 MPa. Both the evaporator and condenser water connections are DN150. The overall dimensions are 4185 × 1810 × 1980 mm, and the operating weight is 4050 kg. The parameters are based on the standard conditions of GB/T 18430.1-2024, and the energy-efficiency evaluation is based on GB 19577-2024.

ПРОЧЕТЕТЕ ОЩЕ
RCH-400E1JA Water- Cooled refrigerant-lubricated bearing Centrifugal Chiller
RCH-400E1JA Water- Cooled refrigerant-lubricated bearing Centrifugal Chiller

Product Introduction The RCH-400E1JA is a 400 RT (1,407 kW) water-cooled centrifugal chiller designed for high-efficiency, stable operation in large HVAC and industrial process-cooling systems. It features a liquid-suspended variable-frequency centrifugal compressor, a falling-film / flooded evaporator, and a shell-and-tube condenser. Under standard conditions, it delivers COP 6.51 and IPLV 9.65, with a low starting current of 2 A and a compact footprint for easy project integration.

ПРОЧЕТЕТЕ ОЩЕ
RCH-800E2JA Water-Cooled Centrifugal Chiller
RCH-800E2JA Water-Cooled Centrifugal Chiller

Product Introduction The RCH-800E2JA is a high-capacity water-cooled centrifugal chiller with a nominal cooling capacity of 2,814 kW (800 RT). It is equipped with two liquid-suspended, variable-frequency centrifugal compressors and is designed for large central cooling and process cooling applications. The unit features high efficiency, stable chilled-water outlet temperature control, and a compact overall design, making it suitable for demanding HVAC and industrial cooling systems.

ПРОЧЕТЕТЕ ОЩЕ
RCH-1200 RT Water-Cooled Variable-Frequency Centrifugal Chiller
RCH-1200 RT Water-Cooled Variable-Frequency Centrifugal Chiller

Product Introduction This product is a 1200 RT (4,220 kW) water-cooled variable-frequency centrifugal chiller equipped with a liquid-suspended variable-frequency centrifugal compressor. Under standard conditions, the chilled-water outlet temperature is 7°C. The unit features large single-unit capacity, high energy efficiency, low starting current, and stable operation, making it suitable for large central air-conditioning systems and industrial process cooling applications. Its COP is 6.68 kW/kW and IPLV is 10.16, delivering strong energy-saving performance at both full load and part load.

ПРОЧЕТЕТЕ ОЩЕ

остави съобщение

Ако се интересувате от нашите продукти и искате да научите повече подробности, моля, оставете съобщение тук, ние ще ви отговорим възможно най-скоро.
Изпращане

Изнасяхме за

Изнасяхме за

остави съобщение

остави съобщение
Ако се интересувате от нашите продукти и искате да научите повече подробности, моля, оставете съобщение тук, ние ще ви отговорим възможно най-скоро.
Изпращане

У дома

Продукти

whatsApp

контакт